ASTM C813-90(2014) |
Standard
Test Method for Hydrophobic Contamination on Glass by Contact
Angle Measurement |
ASTM D5725-1997 |
Standard
Test Method for Surface Wettability and Absorbency of Sheeted
Materials Using an Automated Contact Angle Tester |
ASTM D5946-2009 |
Standard
Test Method for Corona-Treated Polymer Films Using Water Contact
Angle Measurements Active Standard (Latest Version) |
ASTM D7334-08(2013) |
Standard
Practice for Surface Wettability of Coatings, Substrates and
Pigments by Advancing Contact Angle Measurement |
ASTM D7490-13 |
Standard
Test Method for Measurement of the Surface Tension of Solid
Coatings, Substrates and Pigments Using Contact Angle
Measurements |
DIN EN 15802:2010-04 |
Conservation
of Cultural Property – Test Methods – Determination of Static
Contact Angle |
GB/T 24368-2009 |
Test Method
for Hydrophobic Contamination on Glass by Contact Angle
Measurement |
ISO 15989:2004 |
Plastics --
Film and Sheeting -- Measurement of Water-Contact Angle of
Corona-Treated Films |
ISO 27448:2009 |
Test Method
for Self-Cleaning Performance of Semiconducting Photocatalytic
Materials -- Measurement of Water Contact Angle |
JIS R 1703-1:2007 |
Test Method
for Self-Cleaning Performance of Photocatalytic Materials- Part
1: Measurement of Water Contact Angle |
SY/T 5153-1999 |
Determination of Reservoir Rock Wettability |
T 558 om-97 |
Surface
Wettability and Absorbency of Sheeted Materials Using an
Automated Contact Angle Tester |
YS/T 95.1-2001 |
Aluminium
Foil for Air Conditioner Part 1: Untreated Aluminium Foil |
YS/T 95.2-2001 |
Aluminium
Foil for Air Conditioner Part 2: Hydrophilic Aluminium Foil |
DIN 55660-3:2011-12 |
Paints and
Varnishes – Wettability – Part 3: Determination of the Surface
Tension of Liquids Using the Pendant Drop Method |
ASTM D2578-09 |
Standard
Test Method for Wetting Tension of Polyethylene and
Polypropylene Films |
ASTM D7541-11 |
Standard
Practice for Estimating Critical Surface Tensions |
DIN 55660-2:2011-12 |
Paints and
Varnishes – Wettability – Part 2: Determination of the Free
Surface Energy of Solid Surfaces by Measuring the Contact Angle |
DIN 55660-4:2012-04 |
Paints and
Varnishes – Wettability – Part 4: Determination of the Polar and
Dispersive Fractions of the Surface Tension of Liquids from an
Interfacial Tension |
DIN 55660-5:2012-04 |
Paints and
Varnishes – Wettability – Part 5: Determination of the Polar and
Dispersive Fractions of the Surface Tension of Liquids from
Contact Angles |
ISO 8296-2003 |
Plastics --
Film and Sheeting -- Determination of Wetting Tension |
YS/T 455.1-2003 |
Surface
Tension Test Method for Wetting Evaluation of Aluminum Foil |
GB/T 14216-1993 |
Plastics --
Film and Sheeting -- Test Method for Wetting Tension |
ASTM D1331-14 |
Standard
Test Methods for Surface and Interfacial Tension of Solutions of
Surface-Active Agents |
ASTM D1417-10 |
Standard
Test Methods for Rubber Latices - Synthetic |
GB/T 5549-1990 |
Surface
Active Agents - Determination of Surface Tension by Drawing Up
Liquid Films |
GB/T 22237-2008 |
Surface
Active Agents - Determination of Surface Tension |
ISO 304-1985 |
Surface
Active Agents - Determination of Surface Tension by Drawing Up
Liquid Films |
ISO 6889:1986 |
Surface
Active Agents - Determination of Interfacial Tension by Drawing
Up Liquid Films |
JB/T 9388-2002 |
Technical
Conditions of Interfacial Tensiometer |
JJG 101-1992 |
Verification
Regulation and Industry Standards of Interfacial Tensiometer |
QB/T 1323-1991 |
Surface
Active Agents - Determination of Surface Tension by Drawing Up
Liquid Films |
GB/T 11985-1989 |
Surface
Active Agents - Determination of Interfacial Tension - Drop Volume
Method |
ISO 9101:1987(en) |
Surface
Active Agents - Determination of Interfacial Tension - Drop
Volume Method |
BS EN 14370:2004 |
Surface
Active Agents - Determination of Surface Tension |
DIN ISO 1409 (2008-11) |
Determination of Surface Tension by the Ring Method |
DIN EN 14370:2004-11 |
Surface
Active Agents - Determination of Surface Tension |